Archive of the former Yahoo!Groups mailing list: Vintage Simmons Drums (UK) Users Group

the mfb is rudimentary but def works well.

i've done this mod with 2 SDSVs. i use them all the time together actually


	$\"image\"$
::: Simmons SDS-V of the Future ::: I've promised these and so fresh for 2013 here they are! Extensive photos of the inner life and workings of a Simmons SDS-V with the MFB SEQ-01 sequencer built in...

View on xbs11...	Preview by Yahoo

NEW ALLIANCE EAST!!!!

--------------------------------------

New Alliance East - Mastering
New Alliance East - Facebook

X :::: B :::: S

On Thursday, September 17, 2015 6:20 PM, "nuipb1@... [Simmons_Drums]" <Simmons_Drums@yahoogroups.com> wrote:

Hi Group,

Is there any such thing as an adequate sequencer for the SDS-V other than the MTM ?

Ideally one that you could record with from pads and that would record the triggers of course, but also velocity and that could be clocked externally.

I found this idea here:

Simmons SDSV with MFB SEQ-01


	$\"image\"$	Simmons SDSV with MFB SEQ-01 If you own a Simmons SDSV drumbrain and asking yourself what to do with some of the free module slots (if any), heres the idea how to fill it: Use a MFB SEQ-01 ...
View on www.quadratschulz.com	Preview by Yahoo

but as far as I know the MFB SEQ-1 supplies only Accent (that is 2 levels of voltages) not all the voltage range between 0V & 1,5V (1,5V being the maximum voltage via the Pads inputs right ?)

I also heard about connecting each SDS module input to a separate output of a Roland TR-707 for example, but I believe the TR-707 has only accents too (I'll have to check on that), so no velocity.

So what nice solution did you guys find for this job ?

Phil

previous by date	index	next by date
previous in topic	topic list	next in topic

Archive of the former Yahoo!Groups mailing list: Vintage Simmons Drums (UK) Users Group

Subject: Re: [Simmons Drums] sequence the SDS-V