| previous by date | index | next by date |
| previous in topic | topic list | next in topic |
Hola José. Muchas gracias por las fotos. En principio veo alguna cosa diferente. En tu SDS8 unicamente salen 3 cables hacia la placa, mientras que en la mia salen 4 (dos de ellos van al mismo punto de soldadura y hay otro que va a al polo negativo de uno de los condensadores negros. Quizá esto no signifique nada y que debido a que el transformador de la mia es diferente, fue necesario hacer estas conexiones (o quizá el anterior propietario hizo una gran chapuza, no lo sé). ¿Podrias echarle un vistazo al transformador y ver si puedes leer sus características?.
Gracias.
Hi Jose. Thanks for the pics. In principle, I see something different. In your SDS8 only 3 wires go to the board, while mine out 4 (two of them go to the same solder point and there is another that goes to the negative terminal of one of the black capacitors. Perhaps this means nothing and that because the transformer is different from mine, it was necessary to make these connections (or maybe the previous owner did a great fudge, do not know). Could you take a look at the transformer and see if you can read its features ?.Thank you