cant wait!
NEW ALLIANCE EAST!!!!
--------------------------------------
New Alliance East - Mastering
New Alliance East - Facebook
X :::: B :::: S
________________________________
From: "
Jacquot.Patrice@..." <
Jacquot.Patrice@...>
To: Simmons Drums <
Simmons_Drums@yahoogroups.com>
Sent: Monday, July 1, 2013 10:20 AM
Subject: Re : [Simmons Drums] Re: SDS7 Memory Cartridge
:)
----- Mail d'origine -----
De: Richard <
warlandr63@...>
À: Simmons Drums <
Simmons_Drums@yahoogroups.com>
Envoyé: Mon, 01 Jul 2013 10:42:56 +0200 (CEST)
Objet: [Simmons Drums] Re: SDS7 Memory Cartridge
I got a prototype of the "original" up and working. Since then I have been working on a "modern" surface mount reproduction which has a few minor improvements over the original design, eg, lithium battery, leds to indicate protection on etc. I've uploaded some pics showing the status of the design to the photos section
--- In Simmons_Drums@yahoogroups.com, "teknikfourteen" <music@...> wrote:
>
> Very cool !!!
> :-)
>
>
> --- In Simmons_Drums@yahoogroups.com, "Richard" <warlandr63@> wrote:
> >
> > Uploaded a couple of screen caps of work in progress. I'll possibly get a prototype board run this weekend.
> >
> > I'm going to change the axial Electrolytic cap for a modern radial and change the battery config as well. Either to a single 3.6v nicad or rehash the circuit for a 3.2v lithium.. (that will need replacing every 5 to ten years)
> >
> > --- In Simmons_Drums@yahoogroups.com, "alfpaches" <alfpaches@> wrote:
> > >
> > >
> > >
> > > --- In Simmons_Drums@yahoogroups.com, "Richard" <warlandr63@> wrote:
> > > >
> > > > I read with interest the discussions around the pros and cons of the SDS7. Something I have been in search of, as have others, the elusive memory dump cartridge. I have looked for one but can't find one. I have searched for the schematic for it but again cant find it. So, if someone has the schematic or owns a cartridge and can get some good pictures of the pcb (top and bottom from directly above) I could reverse engineer it. Due to my work, I have the ability to do short runs and prototypes from my home workshop so it would be possible to do a run of them for people that may be interested.
> > > >
> > > I just uploaded some pics from my memory card in the photo section. I hope you find them useful
> > >
> >
>
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]