i bought a JP6 from a guy that had a 'pro' 'fix' the bender board.
but neither the LFO 2 or bender worked.
upon inspection he had all of the transistors and caps in backwards!
it's too easy to make this mistake even for people who do it often!
NEW ALLIANCE EAST!!!!
--------------------------------------
New Alliance East - Mastering
New Alliance East - Facebook
X :::: B :::: S
________________________________
From: gordonjcp <
gordon@...>
To:
Simmons_Drums@yahoogroups.com Sent: Tuesday, May 21, 2013 5:38 PM
Subject: [Simmons Drums] Re: SDS 9 elementary problem & deeper fault
> If the mux/demux caps are worn out and ALL the caps are the same age on the board, wouldn't it make sense to change them all? They are cheap enough.
They don't wear out. They rarely fail. When they do, they cause very, very distinctive faults.
It's worth noting that just about the only capacitors I have ever seen fail have been electrolytics used in cheap crappy switched-mode power supplies (which you don't have here) and disc ceramics used at high voltage or in RF amps. In synthesizers I've changed maybe a dozen genuinely faulty capacitors in 20-odd years.
Capacitors don't fail, and they don't wear out.
> As I stated previously, that didn't change the issue I'm having with it, so now it has to be the mux/demux ICs, as stated earlier in this thread by Michael himself on the issue with this machine that this member is having.
Of course it didn't, and now you've got to do what you should have done to begin with - diagnose the fault! The 405x family multiplexers do fail, with either an output getting "stuck" usually to one supply rail or the other, or the inputs just not switching at all. Get an oscilloscope, track down the fault, and replace just the part that has failed.
> If I've replaced all the caps with the proper values and it does the exact same thing it did before, how then could I have created more problems? Can you please explain that theory?
How good is your soldering? Are you sure you read all those capacitors correctly? Are you sure you didn't damage the fragile through-hole plating on the boards? Are you sure you didn't zap something with static?
I won't touch ∗anything∗ that's been "re-capped". I often see synths that have been "re-capped" by some Expert Synth Doctor that then never quite works right again, and then they're just too much bother to put right.
Don't muck about. Track the fault down and fix ∗just that fault∗.
--
Gordonjcp MM0YEQ
[Non-text portions of this message have been removed]