Good point... I have the cymbal in slot 6 and hihat in slot 7 btw...
--
electronically yours, jesper
- -- --- ---- ----- ---- --- -- -
www.electronic-obsession.se
Jacquot.Patrice@... skrev 2013-03-07 11:06:
> talking about that ,
>
> I remember having read a note
>
> "if you intend to put more than 5 cymbals modules in the SDSV. Please
> contact Simmons for a highered powered rack if 7 cymbals are required in
> a rack"
>
> "& do not fit cymbal or hihat in Channel 1 position as the 5v regulator
> on the piggyback board could short on the left hand cheek of the chassis"
>
> so there's quite some concern about that cymbal / hihat cards power feeding.
>
> Even if if it's not the problem yet , why not increasing the PSU caps,
> in the same time, so you have a better reserve ?
>
> Good luck
>
> ----- Mail d'origine -----
> De: jesper <jesper@...
> <mailto:jesper%40electronic-obsession.se>>
> À: Simmons Drums <Simmons_Drums@yahoogroups.com
> <mailto:Simmons_Drums%40yahoogroups.com>>
> Envoyé: Thu, 07 Mar 2013 09:59:29 +0100 (CET)
> Objet: Re: [Simmons Drums] Today's repair...
>
> Nick Zampiello skrev 2013-03-06 16:11:
>
> > yes, but maybe the fact that this card actually has a higher current
>
> > demand may be problematic as well.
>
> >
>
> > especially if it's a crude digital circuit that needs enough to be
> passable.
>
> Good point - will keep that in mind and check for ripples/fluctuations
>
> if necessary.
>
> --
>
> electronically yours, jesper
>
> - -- --- ---- ----- ---- --- -- -
>
> www.electronic-obsession.se