talking about that ,
I remember having read a note
"if you intend to put more than 5 cymbals modules in the SDSV. Please contact Simmons for a highered powered rack if 7 cymbals are required in a rack"
"& do not fit cymbal or hihat in Channel 1 position as the 5v regulator on the piggyback board could short on the left hand cheek of the chassis"
so there's quite some concern about that cymbal / hihat cards power feeding.
Even if if it's not the problem yet , why not increasing the PSU caps, in the same time, so you have a better reserve ?
Good luck
----- Mail d'origine -----
De: jesper <
jesper@...>
À: Simmons Drums <
Simmons_Drums@yahoogroups.com>
Envoyé: Thu, 07 Mar 2013 09:59:29 +0100 (CET)
Objet: Re: [Simmons Drums] Today's repair...
Nick Zampiello skrev 2013-03-06 16:11:
> yes, but maybe the fact that this card actually has a higher current
> demand may be problematic as well.
>
> especially if it's a crude digital circuit that needs enough to be passable.
Good point - will keep that in mind and check for ripples/fluctuations
if necessary.
--
electronically yours, jesper
- -- --- ---- ----- ---- --- -- -
www.electronic-obsession.se
[Non-text portions of this message have been removed]