there are caps on the card too that could be bad.
i just recapped the power and connector plate on an SDSV and it looked like the caps were from the 1920's!
JKLOL.
z
NEW ALLIANCE EAST!!!!
--------------------------------------
New Alliance East - Mastering
New Alliance East - Facebook
X :::: B :::: S
________________________________
From: jesper <
jesper@...>
To:
Simmons_Drums@yahoogroups.com Sent: Monday, March 4, 2013 4:07 AM
Subject: Re: [Simmons Drums] Today's repair...
philmurr skrev 2013-03-03 20:11:
> I'm very happy my IV is working, next up is the SDS-V...
Speaking of which...
Can the tech guys here enlighten me regarding the program selector
switches? I _guess_ the four switches end up at the same IC which opens
the selected path... My hihat card works great upon startup if I stay
with the factory preset. If I choose anything else it turns weird.
Sometimes it plays some odd form of mix of all the presets but mostly
it's just a lame and dull sound coming out. The LEDs either light up all
or none. After fiften minutes or so it works as it should. It might be a
bad soldering joint since heat might help...
I dug out the schematics and looking at that crappy copy it looks as if
the IC2 (14556) might be the culprit. IC1 is a 4013 btw. Any input from
you soldering guys?
--
electronically yours, jesper
- -- --- ---- ----- ---- --- -- -
www.electronic-obsession.se
[Non-text portions of this message have been removed]