Thanks for the info guys, have sent Ed and Patrice messages. :-)
________________________________
From: "
Jacquot.Patrice@..." <
Jacquot.Patrice@...>
To: Simmons Drums <
Simmons_Drums@yahoogroups.com>
Sent: Saturday, 26 January 2013, 14:41
Subject: Re : Re: [Simmons Drums] Mystery SDS7 Module
Hi, I know where to source hybrid boards :),
but can't do nothing for CEMs.
----- Mail d'origine -----
De: Ed
edrose1@...>
À: Simmons Drums
Simmons_Drums@yahoogroups.com>
Envoyé: Sat, 26 Jan 2013 15:33:19 +0100 (CET)
Objet: Re: [Simmons Drums] Mystery SDS7 Module
I hate to to be the bearer of bad news but it'll cost more to repair this module than to buy one that already works. Jesper is right: the Curtis chips have been pulled and, maybe worse, so has the Hybrid board. You may be able to dig up the Curtis chips but the Hybrid is a whole other thing. :(
If you'd like to trade it against a working module, email me and we can work out the details.
--- In Simmons_Drums@yahoogroups.com, jesper wrote:
>
> Chris skrev 2013-01-25 21:51:
> > Hi everybody,
> >
> > I bought an SDS7 card from ebay a few weeks ago for a very reasonable
> > price. My SDS7 is not working at the moment but I couldn't pass it up.
> > It got delivered to my parents house by mistake so I had them take some
> > pictures of it which you can see here:
> >
> > http://www.flickr.com/photos/55843000@N02/sets/72157632607021593/
> >
> > I'm no expert on how these things work but I've compared these pics to
> > my other SDS7 cards and it looks like there are a few pieces missing,
> > though if something has been desoldered, it has been done pretty cleanly.
> >
> > There is no name on the yellow block on the front to identify what type
> > of module it is. Is this common? Can anyone identify it?
> >
> > Now I think it will require some repair, but can it be revived? Or is it
> > missing parts that I will probably never be able to source? Is this a
> > lost cause. I feel I have a duty to try.
> >
> > Onto the parts I can identify does anyone know where I can get any of
> > the blue plastic holders which the EPROM's are seated in? Also the knobs
> > + caps (they look similar to the small SDSV ones?)
> >
> > Thanks!
> >
> > Chris
>
> Aouch!
>
> Looks like someone nicked not just the prom but also the CEM(s?). I'm
> not at home so I cannot check, but these are the parts you "steal" if
> you can. The CEM ICs are expensive today and can be used to repair a lot
> more expensive machines. Hence the robbery. It's probably possible to
> repair, but I doubt it's worth it unless you're a solderer yourself.
>
> Been down the same painful road of insight... :(
>
> I think Ed can help you with knobs and caps! :D
>
> --
> electronically yours, jesper
>
> - -- --- ---- ----- ---- --- -- -
> www.electronic-obsession.se
>
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]