As I measured and interpreted the results it only recharges on one of
the positive soldering connectors. I only used the other (non-charging
one). Problem solved...
But yes, otherwise you're right. :D
--
electronically yours, jesper
- -- --- ---- ----- ---- --- -- -
www.electronic-obsession.se
Jon skrev 2012-11-27 20:29:
>
>
> Great "How-to.." Jesper! I have an SDS7 that is in dire need of a new
> battery and I'm intending to follow your method, using an AA holder and
> Lithium battery. I've read here about disabling the charging circuit if
> you use a non-rechargeable Lithium battery - any advice on how to do that?
> Thanks
> Jon
>
> --- In Simmons_Drums@yahoogroups.com
> <mailto:Simmons_Drums%40yahoogroups.com>, jesper <jesper@...> wrote:
> >
> > I did a quick "how to" just now since I promised to... I hope it can
> > help someone in their quest:
> >
> http://www.electronic-obsession.se/studio/simmons/sds7_battery_replacement.html
> >
> > --
> > electronically yours, jesper
> >
> > - -- --- ---- ----- ---- --- -- -
> > www.electronic-obsession.se
> >
> >
> > WT skrev 2012-09-30 22:24:
> > > Remove the programmer panel and behind that you´ll find the memory card
> > > wich
> > > holds the battery.
> > >
> > > Carefully pull it out, watch the yellow clip on the backplane so it
> doesn´t
> > > slide out of the connector, and you can remove the battery.
> > >
> > > Mind you that all your settings will get erased when you exchange the
> > > battery. Write down all programs you need or better, save to a
> RAM-card if
> > > you have one of those.
> > >
> > > WT
> > >
> > > ----- Original Message -----
> > > From: "Brian Horton" <brianhorton21@...
> > > <mailto:brianhorton21%40yahoo.com>>
> > > To: <Simmons_Drums@yahoogroups.com
> <mailto:Simmons_Drums%40yahoogroups.com>
> <mailto:Simmons_Drums%40yahoogroups.com>>
> > > Sent: Sunday, September 30, 2012 10:49 AM
> > > Subject: [Simmons Drums] Re: battery check
> > >
> > > >
> > > > Hi Jesper ,can i ask how do you dismantle the sds 7 to check if the
> > > > battery is ok.thanks for your help Brian,found out i have serial
> number
> > > > 000010 mtm wish i could make it work thanks
> > > >
> > > >
> > > >
> > > > ------------------------------------