Archive of the former Yahoo!Groups mailing list: Vintage Simmons Drums (UK) Users Group

----- Original Message -----
From: <jesper@...>
To: <Simmons_Drums@yahoogroups.com>
Sent: Thursday, August 19, 2004 9:16 PM
Subject: Re: [Simmons Drums] SDS7 problem


> adam:
> > yes, I have a volt meter, ohm meter etc.
>
> With the SDS-7 powered and a selector cable in place, can you check if you
> get any weird voltages on different pins... and with power off, check for
> short circuits between pins...
>
> These are just guesses since I don't own a SDS-7, but it sounds like there
> are stuff happening on the pins involving program 7 and 16 that shouldn't
> happen...
>
> Lasse, any inputs on the issue?

I don´t have a selector pad but are you sure its not a programming issue ?
If I recall correctly, you can rearrange the order in which the SDS-7
respond to pad selections.

Wait, I´ll go out to the Studio to fetch the manuals ( bloody
rain.........).........

I´ll be back

LJ

http://hem.spray.se/ppgwave/studiopics.html
>
> electronically yours, jesper
> - -- --- ---- ----- ---- --- -- -
> www.electronic-obsession.se
>
>
>
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
>
> --------------------------------------------------------------------------
------
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
> http://groups.yahoo.com/group/Simmons_Drums/
>
> b.. To unsubscribe from this group, send an email to:
> Simmons_Drums-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>