i always kind of assumed all the pads were ' the same ' inside as far as the piezo thingy goes...
i have some SDS800 pads that trigger it, an SDS1000 and an SDSV just about the same...
did the innards change a lot over time? is it an XLR / 1/4" issue some how?
z
NEW ALLIANCE EAST!!!!
--------------------------------------
New Alliance East - Mastering
New Alliance East - Facebook
X :::: B :::: S
________________________________
From: paolobarre <
paolobarre@...>
To:
Simmons_Drums@yahoogroups.com Sent: Friday, May 25, 2012 7:06 AM
Subject: [Simmons Drums] Re: SDS8 pads - triggering problems
Well, thanks for the answers.
I've tried to trigger a Simmons SDS 1000, a Pearl DrumX and an Alesis DM 5. Always the same result: weak trigger signal. With other pads (SDS9 Pads, Pearl DrumX, and Roland PD-31) it doesn't happens, there is a stronger trigger signal.
--- In Simmons_Drums@yahoogroups.com, "WT" <waveterm@...> wrote:
>
> My thought exactly.
>
> WT
>
> ----- Original Message -----
> From: "jesper" <jesper@...>
> To: <Simmons_Drums@yahoogroups.com>
> Sent: Friday, May 25, 2012 10:20 AM
> Subject: Re: [Simmons Drums] SDS8 pads - triggering problems
>
>
> > paolobarre skrev 2012-05-25 09:47:
> >> Hello.
> >> I have a set of Simmons SDS8 pads with triggering problems (the output
> >> trigger signal is very low for all of them). I think i have to replace
> >> their piezo. Where can I find some infos about disassembling these pads?
> >> Thanks in advance.
> >
> > What are you trying to trigger with them? It's not necessarily the
> > piezo...
> >
> > --
> > electronically yours, jesper
> >
> > - -- --- ---- ----- ---- --- -- -
> > www.electronic-obsession.se
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>
[Non-text portions of this message have been removed]