Uhm....
there should not be any voltage going from the MTM to the pad.
WT
----- Original Message -----
From: "Brian Horton" <brianhorton21@...>
To: <Simmons_Drums@yahoogroups.com>
Sent: Wednesday, December 14, 2011 9:05 PM
Subject: [Simmons Drums] Re: mtm
> well the mtm was working before ,so hopefully i csn do it again,there is
> 15 volts to the hi hat resister but nothing to the pads.it is getting midi
> i found when i change kits the light flashes on the other roland module so
> there is no voltage to the pads.anyway the next pad i build i want to make
> the snare three zones across,plus rim shot. and so each zone could be a
> different octive or decay.,and the mtm dual layer or more per zone then
> ill do this for my main toms only two zones.i made one already with two
> zones for hi hat or cymbal depending on kit i choose.i making my own drum
> rack using pipe,its working well two bass drums ,three racks with each pad
> half over the other need to build the third still but im at 16 right now
> ,more to go
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>