Mark Frost skrev 2011-12-13 23:36:
> Well the best of luck to you Brian - most of that would be beyond my
> capabilities. As amatter of interest, is it practical to use 2 MTMs (I
> gather Jesper has 3)Is that a 16 pad setup? Merely interested, as I had
> to incorporate a roland octopad to keep things within reach
I only use one for pads to midi and all three for midi to drum synths.
The good things with the MTM is the velocity control and that you can
choose the output voltage. Now one controls my SDS-V, one the SDS-7 and
one the SDS-III, SDS-IV and Pearl Syncussion. The inputs range from +5
to +15 volts and therefor I find the MTM so good. Many trigger devices
are more or less stuck at +5 or sometimes +10 while the MTM can deliver
all the way to +15.
Also, many trigger devices have locked midi note numbers. With this
setup I can have all three MTM's on the same channel and the trigger
spread across the master keyboard.
--
electronically yours, jesper
- -- --- ---- ----- ---- --- -- -
www.electronic-obsession.se