Backlight? I have two MTMs and neither screen lights up. It's been
difficult to read them and I always thought a backlight would've been nice but not
available or too expensive in 1985.
In a message dated 12/7/2011 5:41:27 P.M. Eastern Standard Time,
airflamesred@... writes:
My word you guys are quick!
Plenty of options so I'll keep you posted. Is there anything we can do
with the display - backlighting? It's all working but just, well, dim at best.
--- In
_Simmons_Drums@yahoogroups.com_
(mailto:
Simmons_Drums@yahoogroups.com) , "WT" <waveterm@...> wrote:
>
> My solution is to replace the old Nicad battery with a standard Lithium
cell
> CR-2032.
>
> You will need to install one 1N4148 diode in series with the + side of
the
> CR2032 to stop the charging voltage otherwise the CR2032 might explode!!!
>
> WT
>
> ----- Original Message -----
> From: "jesper" <jesper@...>
> To: <_Simmons_Drums@yahoogroups.com_
(mailto:
Simmons_Drums@yahoogroups.com) >
> Sent: Wednesday, December 07, 2011 10:29 PM
> Subject: Re: [Simmons Drums] MTM battery
>
>
> > Mark Frost skrev 2011-12-07 22:00:
> >> I'm sure mine must need changing after 15 years. Whats the procedure?
> >> I'm thinking Maplins will have a replacement - would that be right?
And
> >> if anyone has a part No or any other info I would be gratefull.
> >>
> >> Thanks in advance.
> >
> > I'd suggest a non-rechargeable long-life nicad battery. This to avoid
> > future leakage. Get a AA-type and a socket for it. Place it far off the
> > PCB and remove the recharging circuit (if I recall correct it's just
one
> > component). I hope your battery hasn't leaked on the PCB yet. It can be
> > scary...
> > In times like these you realise you ought to take more shots of the
> > procedure while at it. :S
> >
> > No part no to recommend since I bought my stuff here, among the polar
> > bears.
> >
> > --
> > electronically yours, jesper
> >
> > - -- --- ---- ----- ---- --- -- -
> > www.electronic-obsession.se
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>
[Non-text portions of this message have been removed]