Thanks, I�ll get them out again ∗moan, sigh∗ and check. I just put a blank in slot no4 to avoid the problem in the meantime.
btw, why does it take like 12 hours before my messages show up on the list? Am I being punished for using a hotmail account?It feels like I am having a conversation from outer space (using paper cups and a wire).
/Jenna
To:
Simmons_Drums@yahoogroups.comFrom:
waveterm@...Date: Thu, 17 Feb 2011 17:25:13 +0100
Subject: Re: [Simmons Drums] SDS-V trigger problem
Check backplane circuitboard for any short between triggerlines ( with all
modules removed ).
ALso, check if the small plastic positioners are in the correct place in the
connectors.
WT
----- Original Message -----
From: "Jenna" <jennaone@...>
To: <simmons_drums@yahoogroups.com>
Sent: Wednesday, February 16, 2011 6:14 PM
Subject: [Simmons Drums] SDS-V trigger problem
>
> Hello list,I just got this SDSV that seems to have Ch1 and Ch4 mixed up
> somehow. Any trigger that goes into channel 1 also triggers the fourth
> module and vice versa.Does anyone have a theory on what might have
> happened to it during shipping?
> I have already tried disconnecting all the modules and putting them back,
> also tried switching places etc but the problem remains.Nothing obvious
> that I could discover when I opened up the back and examined the inputs
> either...:(
> Thanks / Jenna
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
[Non-text portions of this message have been removed]