There is no "SPB", you sure mean EPB, our good old bad Simmons Epromblower. This is operating with a programming voltage of more than 20V and will definitely "kill" any Eprom with a "C" in its name (27C256). By the way: The EPB was only suitable for 2764 and 27128 type Eproms.
You can't playback 27256 in an SDS1, only 2764 and 27128.
You can't playback 27256 in an SDS9, only 2764 and 27128.
As I explained earlier, these Eproms are only good for use in SDS7 cymbal and hihat cards. Or as quad sound eprom for SDS1000. The programming voltage of them should be 12.5V.
Michael
----- Original Message -----
From: Thomas
To: Simmons_Drums@yahoogroups.com
Sent: Monday, June 21, 2010 9:39 PM
Subject: [Simmons Drums] Re: eeproms suitable for use with simmons?
These are AMD CMOS chips, which require (to my knowledge) a higher voltage than the SPB can provide, to write to. They work fine when using a writer connected to a PC. I have downloaded several of the bin files from simmonsmuseum.com (thanks for those!), and they work perfectly fine on the CMOS chips you are referring to in an SDS7 or an SDS1, and maybe an SDS9. Personally, I haven't tested on an SDS9, seeing as I do not own one ( if anyone feels like donating to the cause, I would not be offended one bit :-P ). Of course you will need to erase them before you attempt to write to them, or you can see what they sound like first. Some sound really cool, some sound really spacey, and some just sound like ass.
Hope this helps.
Thomas
--- In Simmons_Drums@yahoogroups.com, "p_k_daniels" <p_k_daniels@...> wrote:
>
> Hi Gents,
> Can anyone tell me if the following are usable with simmons kits?
> 24 pin eeprom
> marked on top as follows
> AM27C256
> -1500C
> 9629BPA
> 1986 AMD
>
> there are 30 of these being thrown out at work, which I have squirreled away pending your input.
> Thanks
> Pete
>
[Non-text portions of this message have been removed]