I reseated the modules and was still getting triggering problems.
I then noticed an odd thing, if I turned down the pad sensetivity knobs it stopped.
Is this normal as I thought the sens settings effected pad input only?
Cheers. Dave
--- In Simmons_Drums@yahoogroups.com, "WT" <waveterm@...> wrote:
>
> Try taking the module out and reseating it. Just check that the small
> positioner in the connector on the mainframe is present.
>
> WT
>
> ----- Original Message -----
> From: <d.conley@...>
> To: <Simmons_Drums@yahoogroups.com>
> Sent: Monday, May 24, 2010 10:50 PM
> Subject: [Simmons Drums] SDSV input problem
>
>
> > Hi guys
> > I've finally got round to testing my SDSV modules using the 1V inputs. I
> > don't yet have cables to trigger from my SDS9 pads.
> > I used the audio out from a synth to trigger. All fine apart from the toms
> > in slots 5 and 6. Other modules are being triggered instead of those
> > taking the input.
> > Is this a module problem or possibly a chassis problem?
> > Do any of you guys offer servicing? I could maybe do with somebody
> > tweaking it who knows what they are doing! I'm in the UK btw.
> > Thanks. Dave
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>