This could be as well!
I've made my own midimarimba, same probs
berk
>-- Oorspronkelijk bericht --
>To: Simmons_Drums@yahoogroups.com
>From: Jacquot.Patrice@...
>Date: Tue, 01 Jun 2010 09:37:31 +0200
>Subject: Re: [Simmons Drums] Problem with simultaneous trigger
>Reply-To: Simmons_Drums@yahoogroups.com
>
>
>
>Hmmm... sounds like a polyphony problem no ?
>it used to happen on VDrums ... you would play 2 or 3pads right in the
smae
>time & some sounds would disappear. A sort bad polyphony managment.
>
>Check if there isn't anything to assign or if it's the triggering module
>architecture which is like this.
>
>It might not be that ...But it happens...
>
>good luck
>
>
>
>
>Selon Myrios <myrios@...>:
>
>> I've got an older Simmons hexpad set (kick and all) setup on a Gibraltar
>> stand connected to an Alesis DR4. It sounds great, but it appears that
>my
>> "high tom" pad won't trigger if played simultaneously with other pads
(at
>> least not with the kick). I tried a bit of swapping things around (pads,
>> cables) and adjust the trigger sensitivy in the DR4 to no avail. Is this
>a
>> common problem?
>>
>> thanks,
>> jeff
>>
>>
>
>