I posted several times that the SDS7 is very sensitive to physical influences like shocks from transport. Remember, they called it "simmons cabasa". If somebody is so brave to risk a transport, he should wadd it into foam rubber and not attach rack ears.
In case of studio rack use, a large hum problem may show up. The SDS7 has the signal grounding on the metal box and no soft earth/ground lift. Another con is, that the rack ears would only screw to the lid of the box and I myself would not trust the static of this thin metal.
My tip: Screw an Akai Sampler into the rack and place the SDS7 on top of it! You don't need to use the Akai...
Michael
----- Original Message -----
From: Ed
To: Simmons_Drums@yahoogroups.com
Sent: Tuesday, March 23, 2010 4:28 PM
Subject: Re: [Simmons Drums] SDS7 RACK EARS
What about having repros made? I could check with the guy that made my selector pad bracket and see what they'd cost. Let me know if anyone is interested.
--- In Simmons_Drums@yahoogroups.com, jesper <jesper@...> wrote:
>
> alfpaches skrev:
> >
> >
> > Hi
> > I´m looking for a pair of rack ears to my sds 7. Somebody knows where I
> > could find them and if there is an specific kind or more adequate for
> > this module. Thanks in advance
>
> I think just about any would do. Maybe you need to drill a hole ortwo
> though...
>
> --
> electronically yours, jesper
>
> - -- --- ---- ----- ---- --- -- -
> www.electronic-obsession.se
>
[Non-text portions of this message have been removed]