Selon alfpaches <
alfpaches@...>:
> Hi
> I have problems to tigger my sds7. There is no problem with the analog sounds
> but when I use the digital sounds they sound saturated. I set the sensitivity
> pots very down but the response it´s the same. I´m triggering the sds7 by a
> yamaha rx5 drum machine and when I push the pads the sound is good but when I
> play a pattern or sequence from the drum machine the sound is saturated.
> Could it be because an eprom fail?,or could it be for another reason?. Thanks
>
>
If it's ok when you play from pads , your Eproms are ok.
Jesper should be quite close to the problem...
Inside the RX5 the velocity of the pads might be not set as loud as the
sequencer dynamics...
you could try first to check the output signal from the RX5 following your
different triggering sources.
or You have the solution of filtering the signal, through MTM or whatever...
good luck...
Patrice.