Hi Al,
I'm in London as well. Where did you get your SDSV? Ebay or somewhere local? I don't know anywhere that trades in that kind of thing and I frequent Denmark St quite a bit. I only ask because I want to lay my hands on one as well.
Cheers
Chris
--- In Simmons_Drums@yahoogroups.com, "hungry_ghostie" <hungry_ghostie@...> wrote:
>
> Thanks - I found that post you mentioned - Also, after reading your reply I left the drum brain on for several hours , and the Kick module switches started to work eventually - sounds similar to your hi hat!
>
> Looks like I need some new IC's and a bunch of switches for the remaining modules.
>
> Al
>
>
> --- In Simmons_Drums@yahoogroups.com, "hungry_ghostie" <hungry_ghostie@> wrote:
> >
> > Thanks very much Jesper,
> >
> > Glad to be on the list!
> >
> > ATB,
> >
> > Al
> >
> > --- In Simmons_Drums@yahoogroups.com, jesper <jesper@> wrote:
> > >
> > > hungry_ghostie skrev:
> > > > Hi There,
> > > > Al from London....
> > > > I just bought a simmons sdsv brain, and thought I'd join up here.
> > >
> > > Sounds like a splendid idea.
> > >
> > > > I triggered each cannel via an old synth to test it - seems pretty much
> > > > working & sounds amazing! Came with Kick, snare & 4 x tom modules.
> > >
> > > One extra tom compared to the standard setup. Always good to fill the
> > > boring blanks. :)
> > >
> > > > Only issue is that four of the modules seem stuck on the factory preset.
> > > > Perhaps the buttons have given up?! I was wondering if this is a common
> > > > problem?
> > >
> > > Check the archives, but as I recall there were quite recently
> > > discussions regarding this. I seem to remember that it was the IC
> > > associated with the switches, but I can't promise my brain is with me on
> > > that one. I semi-payed attention 'cause my hihat module is have similar
> > > ideas though it works after having been switched on a while.
> > >
> > > > My housemate has some roland V-drums - so hopefully I'll be able to
> > > > trigger it properly using the roland pads...About to start searching
> > > > through messages regarding this!
> > >
> > > "Triggering properly" should mean original hexaheads. :P But if you mean
> > > by hitting pads I think that should work well if you just search for the
> > > correct level settings and the odd XLR-solderings of the SDS-V.
> > >
> > > > All the best
> > > > Al
> > >
> > > Once again, welcome to the list!
> > >
> > > --
> > > electronically yours, jesper
> > >
> > > - -- --- ---- ----- ---- --- -- -
> > > www.electronic-obsession.se
> > >
> >
>