Thnks a lot Vince - it's a start at least. I'd rather receive good guesses than nothing at all! ;)
electronically yours, jesper
www.bolina.hsb.se/hsidor/jesper
- -- --- ---- ----- ---- --- -- -
electronic obsession mailorder
http://obsession.svart.nu ----- Original Message -----
From: "Vince LeGrand" <vlegrand@...>
To: <Simmons_Drums@yahoogroups.com>
Sent: Wednesday, May 22, 2002 1:19 PM
Subject: Re: [Simmons Drums] separate outs
> I don't have an SDS V, but the following information is in my SDS 7 manual:
>
> Serial numbers 0 - 250 are wired:
> Pin 1 and 2 Ground
> Pin 3 Hot
>
> Serial numbers 250 and onwards (this is a quote...who knows exactly how serial number 250 is wired :-)
> Pin 1 and 3 Ground
> Pin 2 Hot
>
> So, my guess would be that the SDS V probably follows the same wiring configuration as the early SDS 7's.
>
> Just my 2 cents.
>
> Vince
> ----- Original Message -----
> From: Jesper
> To: Simmons_Drums@yahoogroups.com
> Sent: Wednesday, May 22, 2002 5:55 AM
> Subject: [Simmons Drums] separate outs
>
>
> Hi dudes!
>
> I'm rigging for separate outs on my SDS-V - there is some weird posting about this on synthsite, but can anyone here tell me which is which, i e 1-2-3, hot-cold-ground, tip-ring-sleeve etc.
>
> Any help appreciated!
>
> electronically yours, jesper
>
> www.bolina.hsb.se/hsidor/jesper
> - -- --- ---- ----- ---- --- -- -
> electronic obsession mailorder
> http://obsession.svart.nu
>
>
>
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
> To unsubscribe from this group, send an email to:
> Simmons_Drums-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To unsubscribe from this group, send an email to:
> Simmons_Drums-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>