Michael,
I´m not sure I should take this post positively :) Haha....
So, what you´re saying, the SDS-7 transformer is universal. Are all SDS-7
transformers like this, or where US SDS-7´s sold with a 120V transformer
only ?
If not, this one is of no use to anyone who needs a conversion. It could
however be used if there´s anyone who has a burnt out transformer that needs
changing.
This transformer came from a shipping-damaged SDS-7 that I parted out.
Actually I used three SDS-7´s to build one fully equipped ( 12 card ) SDS-7.
WT
----- Original Message -----
From: "Michael Buchner" <buchnerelectronics@...>
To: <Simmons_Drums@yahoogroups.com>
Sent: Tuesday, June 09, 2009 6:40 PM
Subject: Re: [Simmons Drums] Parts for sale
Hello,
to enhance your chance getting rid of the SDS7 transformer: It can be used
(by changing the connections) for 240 (orange), 220 (pink), 120 (brown) and
100 (white) Volts. The other connection to the primary coil is always black.
So, now you can start a worldwide offer!
B.t.w.: This is also the way to get rid of voltage-changing devices.
And it is NOT possible with these SDSV transformers.
Regards
Michael
----- Original Message -----
From: WT
To: Simmons_Drums@yahoogroups.com
Sent: Monday, June 08, 2009 8:59 PM
Subject: Re: [Simmons Drums] Parts for sale
Selector pads and Hihatpedal is sold.
SDS-V handle is spoken for.
Any americans need a transformer ?
WT
----- Original Message -----
From: "WT" <waveterm@...>
To: <Simmons_Drums@yahoogroups.com>
Cc: "Analogue Heaven" <analogue@...>
Sent: Sunday, June 07, 2009 1:49 PM
Subject: [Simmons Drums] Parts for sale
> 1x SDS-V transformer 117V. 10 Euros
> 1x SDS-V transformer 117V ?? ( most likely ) 5 Euros
>
> 1x SDS-7 transformer 117V with mounting bracket. 20 Euros
>
> 1x SDS-7 programmer panel with working pot. Red plexi is loose but can
be
> glued. Includes cable to CPU board 30 Euros.
>
> 1x SDS-7 ribboncable 1 Euros
>
> 1x SDS-V blank panel 10 Euros
> 1x SDS-V blank panel with d-sub connector. 5 Euros
>
> 1x SDS-V mixerpanel 5 Euros
>
> 1x SDS-V carrying handle 5 Euros
>
> 8x SDS-7 rubber caps for covering holes in frontpanel ( no modules
> installed ) 1 Euro each or 5 Euros for all.
>
> 1x SDS-7/MTM Selector Pad with 1 broken selector 10 Euros
> 1x SDS-7/MTM Selector Pad with 11 broken selectors 5 Euros
>
> 1x SDS-V Hihatpedal very dirty and rusty. Missing spring so doesn´t
return
> to up position. 5 Euros.
>
> Shipping costs and paypalfees added on top of total sellingprice.
>
> Wanna give me offers ? I´m open for it.
>
> Pictures here :
> http://www.flickr.com/photos/28928718@N07/sets/72157607120036640/
>
> WT
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links