Patrice Jacquot skrev:
>
>
> If it doenst' running at all with no light , you know probably that
> it might be the POwer transformer...
>
> it happened on a new SDS400 I received ...just a very very thin lead
> on the transformer was broken ...probably due to the shipping ...
> & it happened another time on one of my SDS2000s...
>
> So it might be worthwhile looking well on that direction...
>
> good luck ...
Yes, good household rule with electronics. The more dead it seems the
better, 'cause then it's easier to find the problem which is often in
the power circuit area.
I'll never forget the broken SDS-V I bought on Ebay. The switch was
broken and no matter how you pressed it, it stayed in the off position.
Talk about an easy fix and good money spent. :D
--
electronically yours, jesper
- -- --- ---- ----- ---- --- -- -
www.electronic-obsession.se
www.myspace.com/machinepop
- -- --- ---- ----- ---- --- -- -
FRA – arkivera under ”synnerligen misstänkt”