I use the same setup with no problem for my pads that are set up as
cymbols. This is coupled with the drums running on an SDS1000. Standard
mono guitar cables work just fine. Could be the trigger sensitivity
setting on the alesis, its called VCurve, standard is 4 try changing
this number lower or higher(range is 0-7), noise setting and crosstalk
settings also come into play, noise being transmits from rack shake
/floorboard bounce etc, and crosstalk is dual triggering from other
drums.It can be quite time consuming setting it up but its worth every
minute , and I had a lot of fun tuning mine.
These settings need to be setup for each and every pad, ive found the
ones with hard plastic type rubber heads work much better than the ones
with quite springy rubber. IMHO the alesis triggers best with hexheads.
Do you have the manual for the Alesis if not its easy to find as a PDF
on the internet or I can forward you a copy.
Pete
∗ Confidentiality Notice:
This e-mail and any associated files are intended solely for the individual or entity to whom they are addressed. Please do not copy it or use it for any purposes, or disclose its contents to any other person. Further, this e-mail and any associated files may be confidential and further may be legally privileged. This email is from the Invensys Process Systems business unit of Invensys plc which is a company registered in England and Wales with its registered office at Portland House, Bressenden Place, London, SW1E 5BF (Registered number 166023). For a list of European legal entities within the Invensys Process Systems business group, please click here
http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77.If you have received this e-mail in error, you are on notice of its status. Please notify us immediately by reply e-mail and then delete this message from your system. Thank you for your co-operation. You may contact our Helpdesk on +44 (0)20 7821 3859 / 2105 or email
inet.hqhelpdesk@.... This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates).
[Non-text portions of this message have been removed]