Archive of the former Yahoo!Groups mailing list: Vintage Simmons Drums (UK) Users Group

Hi Matt,
Thank you very much.
Cheers,
Steve

--- In Simmons_Drums@yahoogroups.com, "Matt" <sds5@...> wrote:
>
> Hi Steve,
>
> Yeah, they can be taken apart but with care like any of the other
> pads. You'll notice that if you lift up the rubber rim the shell
is
> stapled in to the plywood, it's just a matter of carefully pulling
> the staples out without cracking the shell.
>
> I use a sharp pointy knife to get it started and then a broad flat
> screwdriver once there is enough room to slip it under. You should
> be able to tap the staples back into their original holes once
> you've done your repairs.
>
> Cheers,
>
> Matt.
>
>
>
>
>
> --- In Simmons_Drums@yahoogroups.com, "stixman2364"
> <stixman2364@> wrote:
> >
> > Hello all,
> > Can the SDS8 pads be taken apart (like the sds9) and repaired?
> >
> > Cheers,
> > Steve
> >
>