it could be done by a friend who repairs TVs.
it was a very very thin lead disconnected in the transfo....
At the most, I would have had to change the transfo...
but I've been lucky & he could solder it again despiting the very
precise & delicate intervention...
in total it was maybe an hour of work includingopening & closing the
unit.
About the SDS9's phone socket hum nothing has been done...I don't use
the phones ...
Otherwise the phones circuit should be replaced as SImmons seems
having used a low quality one
(for a reason I don't remember)
Patrice.
Le 3 févr. 08 à 04:27, swangler1 a écrit :
> Patrice,
> Thanks for the info.
> What did it take for the ones that you got to be fixed?
>
> Scott
>
> --- In Simmons_Drums@yahoogroups.com, Patrice Jacquot
> <Jacquot.Patrice@...> wrote:
> >
> > Hi Scott,
> >
> > no idea about the repairs in this area...
> > but the fact is that it's often happening ...
> > I received 2 modules supposely sent in a good & new state & with
> some
> > transformers broken...probably in the shipping ...
> >
> > If the hum is on the phones socket , Im' afraid it's normal ...all
> > SDS9 have this problem...
> > If there's more output concerned , then yes it needs some
> maintenance...
> >
> > Hope that helps,
> > Good luck,
> > Patrice.
> >
> >
> >
> > Le 3 févr. 08 à 00:09, swangler1 a écrit :
> >
> > > Anyone know how much it would cost & where to get an SDS9 module
> > > repaired in the Palm
> > > Springs California area? I just sold one to a guy there & he said
> > > when he got it & turned it on,
> > > there was a some kind of a squeal or hum that he couldn't get
> to go
> > > away. It worked fine
> > > when I shipped it, but we need to figure something out.
> > >
> > > Thanks for any help,
> > > Scott
> > >
> > >
> > >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
[Non-text portions of this message have been removed]