thanks for the reply
i want to match the pots as well as possible.
the shafts are plastic and would like to match the knob fitting.
on the rear of the pot, there is a small metal tab that protrudes
out and is soldered to the pcb for stability.
i was hoping someone would know the exact or closest pot that will
fit the pcb and the knobs on the shaft.
yes mouser has a bunch of pots and i will recheck tomorrow as i need
to order parts anyway.
i was hoping others had replaced these pots and had a good source or
substitute for them.
the issue is broken shafts and some pots are very dirty noisy and
contact cleaner will not do a sufficient job on these pots.
thanks
--- In Simmons_Drums@yahoogroups.com, jesper <jesper@...> wrote:
>
> ksefm skrev:
> >
> >
> > does anyone know where replacement pots can be found?
> > any cross references etc.
> > how about at mouser, newark digikey etc.
> > any help appreciated
> > thanks
>
> I've bought at swedish store bejoken.se so I figure most good
> electronics shop have. Just bring the part broken and see what
they've
> got. At mouser you can get most things but you need to search a
while in
> their extensive catalogue...
>
> Oh, was it that you wanted to avoid?! :)
>
> --
> electronically yours, jesper
> - -- --- ---- ----- ---- --- -- -
> www.electronic-obsession.se
> www.myspace.com/machinepop
> - -- --- ---- ----- ---- --- -- -
>