giamesimmons skrev:
>
>
> There's a dedicated channel for the rimshot consisting of two proms:
> one for rimshot and one for cross stick, you can program if you want
> to use rimshot A or rimshot B..
> However the input for the trigger signal is only one jack stereo: tip
> for the snare and sleeve for rimshot. The rimshot so is activates
> when you strike the border of the dual zone pad connected to this
> stereo input. All of this in theory because I don't have the dual
> zone pad... however I can trigger from a midi keyboard and the
> rimshot channel don't want to work...
> If I put the snare prom into the rimshot slot, it don't work.
> If I put the rimshot prom into the snare slot: it's ok...
Not trying to point you out as a moron, but are you triggering from the
midi keyboard and sending the trig to _just_ ring or _just_ tip to check?
If so, and it works from the button on the machine, I'd say it's a
simple loose wire between socket and the prom circuit. Or did I miss
anything here? Loose wire can also be a bad soldering OC but in general
it sounds as if the external control to that specific prom circuit is
the villain...
--
electronically yours, jesper
- -- --- ---- ----- ---- --- -- -
www.electronic-obsession.se
www.myspace.com/machinepop
- -- --- ---- ----- ---- --- -- -