Thanks for the advice Jesper I will check out the voltage via the PSU.
Regards,
Trevor
--- In Simmons_Drums@yahoogroups.com, <jesper@...> wrote:
>
> Sounds like the "6" indicates a malfunction. Have you checked a
manual?
> Otherwise, the first thing to do is to see if the PSU is delivering
what
> it's promising...
> The battery you changed is "just" for memory.
>
> electronically yours, jesper
> - -- --- ---- ----- ---- --- -- -
> www.electronic-obsession.se
> www.myspace.com/machinepop
>
> ----- Original Message -----
> From: "trevor_berner" <trevor_berner@...>
> To: <Simmons_Drums@yahoogroups.com>
> Sent: Wednesday, September 26, 2007 10:30 PM
> Subject: [Simmons Drums] SDS9 start up problems
>
>
> Hi all, my first post to this user group, I have an SDS9 module
which
> has been with me since new but only recently brought out of
retirement
> after about 10 years of being locked away in a cardboard box. The
> problem I have is that at power on the unit flashes once (all leds
and
> displays) and then the display flashes a single number 6 and then
seems
> to shut down with nothing displaying and no leds luminated.
> I have replace the onboard 3.6 V battery but still the same, any
ideas?
> Thanks for any help,
> Regards,
> Trevor
>