Archive of the former Yahoo!Groups mailing list: Vintage Simmons Drums (UK) Users Group

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: Betr: [Simmons Drums] Cheetah MD16 Drum Machine Question

From: <jesper@...>
Date: 2007-07-03

∗aouch! battery acid∗

Well, since everything seems OK except midi I guess you need to focus on
that area. But to be honest and if you're not into soldering as a hobby I'd
check for a new cheetah on Ebay and use the other for reserve etc. It's not
really the most expensive piece of gear...

Midi signals can be hard to trace since they're digital. It's not as obvious
as an all-analogue system. But that's my two swedish ören, I'm no tech wiz
so others might feel different.

electronically yours, jesper
- -- --- ---- ----- ---- --- -- -
www.electronic-obsession.se

Order your own copy of the Machinepop/Imiafan
split-EP at www.electronic-obsession.se/label.asp

"Varför har du så många pianon?" (Nora Persson, 9 år)

----- Original Message -----
From: "andyc69uk" <andyc69uk@...>
To: <Simmons_Drums@yahoogroups.com>
Sent: Monday, July 02, 2007 11:14 PM
Subject: Re: Betr: [Simmons Drums] Cheetah MD16 Drum Machine Question


> Hi Berk / All
>
>
> Thanks for the interest.
> The midi leads I am using are fine, this is not the problem.
>
> I used to use the Cheetah as a Pad input to MIDI interface (using
> Simmons pads). Also, have a Kenton-Midi'ed SDS7 but it is midi-out
> only so you can appreciate the usefulness of the Cheetah! However, my
> gear has been in storage for years and during this time the internal
> battery has leaked across the main PCB in the Cheetah. I have
> replaced the battery and repaired some of the obviously broken pcb
> track. Also, checked many pcb connections and all seem ok now.
> However, some acid has leaked on the components. I was wondering if
> anyone else out there had also gone through this trouble and worked
> out which components most likely need changing before I attempt to
> start changing some likely suspects.
> Regards
> Andy
>
> --- In Simmons_Drums@yahoogroups.com, "Berk Aarts" <B.E.R.K@...>
> wrote:
>>
>> do you have decent cables??
>> Berk
>>
>>
>>
>>
>> >-- Oorspronkelijk bericht --
>> >To: Simmons_Drums@yahoogroups.com
>> >From: "andyc69uk" <andyc69uk@...>
>> >Date: Sat, 30 Jun 2007 19:16:38 -0000
>> >Subject: [Simmons Drums] Cheetah MD16 Drum Machine Question
>> >Reply-To: Simmons_Drums@yahoogroups.com
>> >
>> >
>> >I know this is a long shot but are there any other users of the
>> >Cheetah MD16 drum machine
>> >on this user group? I am having major midi problems with
>> >mine. I've replaced the leaking battery but midi still doesn't
>> >work. Also, bought another second hand unit but getting the
>> >same problem with this unit also!! Would anyone have any tips?
>> >
>> >Thanks
>> >Andy
>> >
>>
>>
>>
> ______________________________________________________________________
> __________________
>> 12move ADSL: Voordelig, snel en onbeperkt internet.
>> Meer informatie vind je op http://adsl.12move.nl
>>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>