Hi Berk / All
Thanks for the interest.
The midi leads I am using are fine, this is not the problem.
I used to use the Cheetah as a Pad input to MIDI interface (using
Simmons pads). Also, have a Kenton-Midi'ed SDS7 but it is midi-out
only so you can appreciate the usefulness of the Cheetah! However, my
gear has been in storage for years and during this time the internal
battery has leaked across the main PCB in the Cheetah. I have
replaced the battery and repaired some of the obviously broken pcb
track. Also, checked many pcb connections and all seem ok now.
However, some acid has leaked on the components. I was wondering if
anyone else out there had also gone through this trouble and worked
out which components most likely need changing before I attempt to
start changing some likely suspects.
Regards
Andy
--- In
Simmons_Drums@yahoogroups.com, "Berk Aarts" <B.E.R.K@...>
wrote:
>
> do you have decent cables??
> Berk
>
>
>
>
> >-- Oorspronkelijk bericht --
> >To: Simmons_Drums@yahoogroups.com
> >From: "andyc69uk" <andyc69uk@...>
> >Date: Sat, 30 Jun 2007 19:16:38 -0000
> >Subject: [Simmons Drums] Cheetah MD16 Drum Machine Question
> >Reply-To: Simmons_Drums@yahoogroups.com
> >
> >
> >I know this is a long shot but are there any other users of the
> >Cheetah MD16 drum machine
> >on this user group? I am having major midi problems with
> >mine. I've replaced the leaking battery but midi still doesn't
> >work. Also, bought another second hand unit but getting the
> >same problem with this unit also!! Would anyone have any tips?
> >
> >Thanks
> >Andy
> >
>
>
>
______________________________________________________________________
__________________
> 12move ADSL: Voordelig, snel en onbeperkt internet.
> Meer informatie vind je op http://adsl.12move.nl
>