perhaps the voltage falls too 5V when the rest is connected???
but if you find the schematics, please let me know cause I've a controller
but not the soundmodule
BERK!
>-- Oorspronkelijk bericht --
>To: Simmons_Drums@yahoogroups.com
>From: "bty293472" <p.e.booker@...>
>Date: Fri, 13 Oct 2006 13:06:20 -0000
>Subject: [Simmons Drums] Silicon Mallet
>Reply-To: Simmons_Drums@yahoogroups.com
>
>
>Hi,
>I'm keen to learn where I may find circuit diagrams for this, because I
>have a problem with my power supply board I don't understand.
>It has three +5v regulators, one +12v, one -12v, and one -5v. The
>instrument used to lock up after about 20 minutes, suggesting a thermal
>problem. Then the audio output failed, but I was still able to play it
>as a controller for another MIDI tone generator. I found one of the +5v
>was putting out +6.2v, and the -5v was putting out -6.2v (this without
>any load plugged into the board), so I changed them both, with no
>change, so now I'm stumped.
>Maybe one of you recogize the layout from another product?
>Many thanks
>Paul
>
>
________________________________________________________________________________________
Wil je met mij knikkeren? Doe mee aan 12move "potje knikkeren" en win geweldige
prijzen.
Speel het spel en bekijk de voorwaarden op
http://potjeknikkeren.12move.nl