I was wondering if any of you have come up with a simple automated tool
changing system, or have seen one that is within a "simple man's" reach to
fabricate.
Robert
:)
-----Message d'origine-----
De :
Homebrew_PCBs@yahoogroups.com [mailto:
Homebrew_PCBs@yahoogroups.com] De
la part de
JanRwl@...Envoyé : juin 12 2005 01:16
À :
Homebrew_PCBs@yahoogroups.comObjet : Re: [Homebrew_PCBs] setting the rings on carbide drills
In a message dated 6/11/2005 10:47:00 A.M. Central Daylight Time,
stefan_trethan@... writes:
seriously, i want to make bit changing easier. it is a pain to adjust
the drill in a pivoting press to just drill through the PCB each time. I
will set the ring so it just sits against the collet and i don't need to
care for anything.
It will also be of help with the CNC drill later i suppose. I only need
like 0.5mm accuracy.
IC! That makes it clear. Logical.
[Non-text portions of this message have been removed]
Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBsIf Files or Photos are running short of space, post them here:
http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ Yahoo! Groups Links