Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

In a message dated 5/7/2005 9:26:20 AM Eastern Daylight Time,
lcdpublishing@... writes:

Hi Kent,

I suspect the ink in your printer is water based ink, that would not
flow out as you would hope. I think a solvent based ink would be
needed for printing on metals and even plastics. If you ever tried
to print on transparencies that are not for ink jets, you get the
same problem.

So I don't think an ordinary ink-jet printer would work, but I think
the concept would.



The only inkjet that would work is an EPSON with the Dye Sub ink kit added.
Those inks when heated are water proof!

Ray Russell
NMRA-40609
General Contractor
Norfolk & Western Railroad
Pocahontas Division
Circa 1958
Visit The "NEW" Pocahontas Website at:_ Click here: N & W Pocahontas
Division_ (http://members.aol.com/rruss45826/public_html/index.html)
http://members.aol.com/rruss45826/public_html/index.html

OR_ Click here: Pocahontas Home_
(http://milliron.home.sprynet.com/Pocahontas/Pocahontas1.htm)
For the old website!
http://milliron.home.sprynet.com/Pocahontas/Pocahontas1.htm


[Non-text portions of this message have been removed]