Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

In a message dated 4/23/2005 6:17:28 P.M. Eastern Daylight Time,
JanRwl@... writes:

1). Cutting boards
Does anyone know of a suitable mini saw table/inverted router type setup to
accurately cut PCBs to size?<<
There are small "table saws" with 5 or 5½" blades available. Not much
good,
but would do for PCB work, but ONLY if you use a carbide-tipped blade. The
more teeth the better.




Boards can easily be cut to size on a band saw. I also use this saw with a
diamond blade and it works great!
_Click here: Tools and Supplies for Building Scale Models | Micro-Mark: The
Small Tool Specialists_
(http://www.ares-server.com/Ares/Ares.asp?MerchantID=RET01229&Action=Catalog&Type=Product&ID=80463)
Ray Russell
NMRA-40609
General Contractor
Norfolk & Western Railroad
Pocahontas Division
Circa 1958
Visit The "NEW" Pocahontas Website at:_ Click here: N & W Pocahontas
Division_ (http://members.aol.com/rruss45826/public_html/index.html)
http://members.aol.com/rruss45826/public_html/index.html

OR_ Click here: Pocahontas Home_
(http://milliron.home.sprynet.com/Pocahontas/Pocahontas1.htm)
For the old website!
http://milliron.home.sprynet.com/Pocahontas/Pocahontas1.htm


[Non-text portions of this message have been removed]