Grant, I haven't done the modification because i am running 0.040
boards. Maybe you could ask that question on Pulsar site
www.pulsar.gs? He is very helpful and I amsure he knows the answer.
It appears there are already three people that own that fine
laminator und morgen die ganze Welt! Mike
--- In
Homebrew_PCBs@yahoogroups.com, "grantfair2001"
<grant.fair@s...> wrote:
> I just bought a GBC H200 laminator and am trying to modify it as per
> the plans on the www.pulsar.gs website for use with toner transfer
to
> PCBs.
>
> Step (12) in their modification involves removing the "Release
Lever".
> It is press fit (I think) into the plastic motor mount assembly. I
> have been unable to budge it using finger pressure. Can anyone who
has
> succeeded in this mod advise how?
>
> A more minor question - in step (7) I was able to remove the plastic
> spacers from the bottom guide plate. But there are no strips of
> silicone rubber on the other guide plate, as described in the mods.
> Anyone else encounter this?
>
> Grant