On FR4 I get a very small amount of staining. It is a slight bluish
mottling which I can certainly live with. Its barely visible.
I dont think water works well with acetone. If I haven't completely
dried off the board, the toner will not disolve.
--- In
Homebrew_PCBs@yahoogroups.com, Stefan Trethan
<stefan_trethan@g...> wrote:
> On Mon, 21 Jun 2004 19:56:43 -0000, Phil <phil1960us@y...> wrote:
>
> > nail polish works very well except it takes a little time to dry
(hot
> > air gun works great on it). works well in ammonium perchlorate.
> >
> > acetone is an awesome resist remover, especially on toner which
comes
> > off in seconds with an old toothbrush.
>
> And it is not rubbing into the epoxy?
>
> why is this happening only to me?
>
> are you using undiluted acetone?
>
> I'm not surprised it is attacking the boards, i use it regularly to
> solvent-glue plastic, but you guys repeatedly say it works for pcbs
and
> i wonder why it doesn't work for me.
>
> ST