>
> One of these days I will do multilayer. Biggest problem is having a
> place to setup a PTH station. It will be a while before I have a place
> where I can do something like that.
> I do not use a "real" reflow oven, but my cheap little toaster oven
> does a pretty good job of pretending to be one.:)
>
the ovens i tried took awfully long to heat the board.
please do a little experiment some day and glue two pieces of pcb together
with epoxy,
press them in a vice and bake them.
I'm very curious if it bubbles up... make sure you let it cure a day or so.
do take care with mixing it real good because thin layers of epoxy like to
cause trouble.
st