John,
Keep the traces that come out of the L298 to the motor
as fat and short as you can. Also the pins that go to the sense
resistors to ground. Also the pin that supplies the plus motor voltage
to the L298. The rest can be thin.
John
--- In Homebrew_PCBs@y..., "marble_h" <marble_h@y...> wrote:
> is there a set thickness when doing a trace is .050 to small or
does
> it matter.On the board I just did ,I made most at .125 and the
> smallest is .050 is that ok I have not finnished the board but I
will
> post it tonight I still have to but in all the dill holes but let
me
> know what you guys think of it so far .
>
>
> John Brauweiler