you're right in your assumption. I keep trying to nail the moving
rabit with negatives... Mike
--- In Homebrew_PCBs@yahoogroups.com, "Jeremy Taylor" <jt@j...> wrote:
> I think the film has the most to do with it. I have a home made 6
bulb (3
> per side) box, with 18" bulbs 3" away. I use the boards from circuit
> specialists, They say right on the package, 90 seconds with Real UV
bulbs,
> or (up to) 9 min with standard fluorescent. The black light bulbs
seem to
> fall somewhere in the middle. I use them - 6-7 min seems to be
perfect. I'm
> sure real uv bulbs would speed it up, and normal fluorescent would
slow it
> down (but it'd still work)
> I think the difference would be more dramatic with a negative style
pro
> film.
>
> ----- Original Message -----
> From: "mikezcnc" <eemikez@c...>
> To: <Homebrew_PCBs@yahoogroups.com>
> Sent: Wednesday, January 21, 2004 11:18 AM
> Subject: [Homebrew_PCBs] Re: UV light sources question
>
>
> > Notice Stefan that he sad that the Black Light he's got does have
> > the Blue Filter on them ie the types are blue... But it still
beats
> > the sun exposure. By deafult the Black Light is designed for human
> > eyes viewing and therefore cannot be the damaging light, ie won't
be
> > too great as we know now, for PCBs.
> >
> > Mike
> >
> > --- In Homebrew_PCBs@yahoogroups.com, Stefan Trethan
> > <stefan_trethan@g...> wrote:
> > > On Wed, 21 Jan 2004 06:37:37 -0000, Ben H. Lanmon <bhleavi@y...>
> > > wrote:
> > >
> > > > The tubes that I am using are Black Lite, when I got them at
a
> > > > lighting dist. I had asked for these with out the blue filter
> > which
> > > > was what M.G. Chemicals had recommended using but after I
picked
> > > > them up and got home with them found that they had sold me
tubes
> > > > with the blue filter. I tried them and worked OK so here I am
> > some
> > > > 10 years later and still using them. They are a Sylvania
> > > > Blacklight Blue F15T8/BLB I use (4) of these at a distance
of
> > > > about 7" for about 5 to 6 mins. I normally do boards 12" x
8" or
> > > > 10" x 8" in size and using the M.G. Chemicals 600 series
boards.
> > > >
> > > > Ben
> > > >
> > >
> > > i think with the proper tubes (4 at 7") you should have 30s.
> > > i am sure about that, because i used such a unit some time ago.
> > > i'm sorry but i can no longer look for the type of tubes and
didn't
> > then.
> > > the board was bungard i think, but standard sensitivity (no
> > darkroom or so
> > > required).
> > > I suspect it must be short-wavelength UV.
> > > this has more energy by itself, maybe also the resist is more
> > sensitive.
> > > the "black light" tubes are, as said before, long wave uv (to
> > protect the
> > > eyes).
> > >
> > > ST
> >
> >
> > Be sure to visit the group home and check for new Bookmarks and
files:
> > http://groups.yahoo.com/group/Homebrew_PCBs
> >
> > Yahoo! Groups Links
> >
> > To visit your group on the web, go to:
> > http://groups.yahoo.com/group/Homebrew_PCBs/
> >
> > To unsubscribe from this group, send an email to:
> > Homebrew_PCBs-unsubscribe@yahoogroups.com
> >
> > Your use of Yahoo! Groups is subject to:
> > http://docs.yahoo.com/info/terms/
> >
> >