Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [Homebrew_PCBs] My materials for "Cold Process?"

From: Kirk Kleinschmidt <kirk@...>
Date: 2016-01-19

At Sally Beauty they call their strongest hydrogen peroxide "Salon Care Maximum Lift 40 Volume Clear Developer."

FYI, "40 volume" = a 12% hydrogen peroxide solution.

It seems to be on sale now for $1.50 a quart = good deal :)

--Kirk, NT0Z
 
My book, "Stealth Amateur Radio," is now available from
www.stealthamateur.com and on the Amazon Kindle (soon)


On Tuesday, January 19, 2016 3:46 PM, "'John Snyder' Kochcal@... [Homebrew_PCBs]" <Homebrew_PCBs@yahoogroups.com> wrote:


 
Roland
 
Thanks for the specific information.
Can you also tell us the printer and if ithas oem toner or not
And an idea of the line width  and spacingsize?
 
John
 
From:Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com]
Sent: Monday, January 18, 20162:37 PM
To: Homebrew PCBs
Subject: Re: [Homebrew_PCBs] Mymaterials for "Cold Process?"
 



Boman33:
 
I just walked in from my shop where Ijust completed another perfect cold toner transfer using
a 2 to 1 ratio of "Top Care isoalcohol 70% to "Equate" nail polish remover, 100% acetone,
from my local Walgreen's emporium.
 
The PC laser image is on  Office One"Business Gloss" 32lb. 92 brilliance (indication of glossy surface)paper.
This paper is  made by HammerMillPaper Co.
 
Next, I will try Office Max "HighGloss" photo paper, which is thicker and much glossier
than the above, but much moreexpensive.  This stuff works quite well with "Hot Transfer"
technique.
 
Regards,
 
Roland F. Harriston, P.D.
∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗