Roger,
It is possible to program smt chips before mounting them, but the zifsocket is a bit pricey. What I usually do is provide pads for a header toprogram the chip in-circuit. I'll be a sport and send you the pcb with amounted and programmed mcu for the $10 you have left. Send me $10 viaPaypal, or a check and I'll get it out to you. I'll throw in postage ifyou're in the US.
Mark
At 06:46 PM 8/15/2014, you wrote:
Mark,
I suspected that 12" might be enough, but thought a spare might be agood idea. I have the hardware and sensor coming. I have a lot of throughhole soldering experience, but none on SMT, so perhaps its about time Igive that a try on this. How much for just the PCB and its components?And can you program the MCU off-board prior to soldering to the PCB? (Ihad hoped to keep the cost of this project as a DIY at under $100, but sofar I have $40 for the printer, and $50 in parts with the PCB and itscomponents still outstanding...)
Thanks,
Roger
On 8/15/2014 2:03 PM, Mark Lermanmlerman@...[Homebrew_PCBs] wrote:
Roger,
You are correct on the part # - the one I bought is 48 inches, but you only need 12".
I can supply a PCB and I'll be happy to mount the smt parts, but you caneasily do it yourself. Say $25 usd, including shipping to the US for pcb,mounted and programmed ATtiny13 and resistor and cap. Do you have thesensor?
Mark
At 04:40 PM 8/15/2014, you wrote:
Mark,
In light of your kit offer, I should clarify my request for a kit, as Iwas only thinking of a MCU PCB parts kit (with perhaps the MCU onlypre-installed?). I can modify the printer without problems, and if Icould get the PCB, or MCU & PCB as a parts kit, I could assemble itif not surface mounted components. I just placed a McMaster-Carr order,and I noted that in your list, 6"x24"x.016 Aluminum Sheet (89015K17) is actually 48", and should be (89015K114 ) for24".
Thanks,
Roger
On 8/15/2014 9:44 AM, Mark Lermanmlerman@...[Homebrew_PCBs] wrote:
I am willing, within reason, to consider collecting and"kitting" the parts for the E260 conversion. One problem isshipping a 2 foot long x 6 inch wide piece of sheet aluminum. In orderfor me to spend that much time and energy on this I would have to make aprofit. Also, we now have 2 versions to consider. I'm not really keen onmaking money from hobbyists, especially those on this group, but I wouldbe providing a service for something that I have, in fact, told you howto do yourself. So I really don't feel too badly about asking $100 USDper kit for the mechanical version and $150 USD for the MCU version, notincluding shipping. Shipping will be at cost.
I also have a couple of modified machines that I am interested inselling. It's very hard for me to put a price on these machines, but $250USD seems about right, considering how much time I have spent on eachone.
I guess I might as well go all-in and offer to convert these printers foranyone who wants to ship me one for conversion. $175 USD for theconversion, parts included, plus shipping. Either version.
Again, I want to stress that I am happy to provide gratis, asalways, all the information and help anyone wants.
Mark
--
Dell XPS8700 256GB SSD 2TB HD 24.0 GB RAM Win8.1 64-bit Intel x64 8Core(TM) i7-4770 CPU@3.40GHz 3.40GHz
--
Dell XPS8700 256GB SSD 2TB HD 24.0 GB RAM Win8.1 64-bit Intel x64 8Core(TM) i7-4770 CPU@3.40GHz 3.40GHz