I'm going to post an Instructible soon. There are two versions of the
hack. The simplest just requires removal of the fuser, adding a set
of input rollers, and moving the exit sensor (or adding a
microprocessor), but it only allows .032 thick pcbs. To get thicker
boards you need to cut a bit of plastic and add a microprocessor. Not
hard, but does take some time.
At 05:39 PM 7/18/2014, you wrote:
>Mark,
>
>
>Can you say more about how you modified the laser printer?
>
>
>Thanks,
>
>
>Rick
>
>
>-----Original Message-----
>From: Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com]
>Sent: Friday, July 18, 2014 11:50 AM
>To: Homebrew_PCBs@yahoogroups.com
>Subject: [Homebrew_PCBs] Direct Laser Printing Video
>
>
>Hello all,
>
>
>Here is a video I just posted of my process that uses a modified laser
>printer to print toner directly on copperclad:
>
>
><https://www.youtube.com/watch?v=VY-7hQ6ocx8>
>
>
>Mark
>
>
>
>
>
>
>------------------------------------
>Posted by: Mark Lerman <mlerman@...>
>------------------------------------
>
>
>Be sure to visit the group home and check for new Links, Files, and Photos:
>http://groups.yahoo.com/group/Homebrew_PCBs
>------------------------------------
>
>
>Yahoo Groups Links
>
>
>
>
>
>
>
>
>
>
>------------------------------------
>Posted by: "Rick Sparber" <rgsparber@...>
>------------------------------------
>
>Be sure to visit the group home and check for new Links, Files, and Photos:
>http://groups.yahoo.com/group/Homebrew_PCBs
>------------------------------------
>
>Yahoo Groups Links
>
>
>