On Sun, 26 May 2013 12:51:39 -0000, you wrote:
>
>
>I am looking for an opinion on whether a HP Laser Jet 1320 printer is good enough to make print outs for PCBs on Press-n-peel Blue or magazine paper.
>
>thanks
>
>
>
>------------------------------------
>
I've messed with almost every model of laser printer HP
has ever sold and never had a problem with any of them.
You do want to set the printer/driver for maximum resolution
and density. Over the years there have been problems with refilled
toner cartridges, so it's probably worthwhile to keep a
"real HP" toner cartridge for PCB work and use the refills
and third party cartridges for day-to-day printing. Branch out to
the less expensive stuff after you have your process down pat.
At present I'm using an HP1022 with a toner cartridge from
dx.com (IIRC around $30 delivered) with no problems.
The "real HP" it replaced MAY have been a bit better.
Keith Bowers WB4LSJ- Thomasville, NC