I'm using the spray bottle version from MG Chemicals. After two tries and no
luck, I'm now waiting for an answer from their help line.
Rick
-----Original Message-----
From:
Homebrew_PCBs@yahoogroups.com [mailto:
Homebrew_PCBs@yahoogroups.com]
On Behalf Of alexhun19
Sent: Tuesday, April 02, 2013 1:26 PM
To:
Homebrew_PCBs@yahoogroups.comSubject: [Homebrew_PCBs] Re: Seno 100 photo resist applicator
Thanks to all responders!
I'll give the squeegee a try on the next batch.
As Leon kindly clarified, it is a liquid resist, supplied in an applicator
similar to some shoe polish ones: a small tube with a sponge on the end. As
you push on the sponge a small valve allows an amount of liquid resist into
the sponge to be distributed on the board.
The challenge is to get the resist distributed on the board in a nice even
way, without building up too much of a layer. The stuff has a tendency to
form ridges and dry very quickly, leaving little time for it the settle to
an even coat.
Alex
>
> Alex
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
------------------------------------
Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links