Hi,
You may have found what you are looking for already, but I have a site that
sells many sizes of eyelets, see below, you may find what you need. Hope
this helps.
http://www.soldertools.net/search.php?search_query=eyelet Paul :-) :-)
_____
From:
Homebrew_PCBs@yahoogroups.com [mailto:
Homebrew_PCBs@yahoogroups.com]
On Behalf Of James
Sent: Wednesday, March 20, 2013 7:44 AM
To:
Homebrew_PCBs@yahoogroups.comSubject: [Homebrew_PCBs] Via Rivets To Fit 0.8mm Hole
Hi all, I would like to use some via rivets, thing is, I want to use
them in a 0.8mm drill hole.
I purchased a few (from a Taobao seller) which were advertised as 0.8mm,
but they turn out to be closer to 0.9mm outer diameter and are not going
to fit (I tried, I did get one to jam in, just, but it wasn't easy!),
I'd really rather stick with 0.8mm holes.
Search hard as I can, high, and low, ebay, taobao, alibaba.... I just
can not find anything smaller than 0.8mm, apart from... this old thread:
http://tech.dir.groups.yahoo.com/group/Homebrew_PCBs/message/24987where indeed megauk sells rivets suitable for that drill size.
Unfortunately, megauk wants to charge me 30 pounds to post them to me,
30 pounds shipping, for a bag of rivets which probably weigh less than
10 grams
So, does anybody know of any other sources for rivets which will fit in
a 0.8mm hole?
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]