Steve,
How would the stepper fit into my plan to etch the dial?
Rick
-----Original Message-----
From:
Homebrew_PCBs@yahoogroups.com [mailto:
Homebrew_PCBs@yahoogroups.com]
On Behalf Of AlienRelics
Sent: Monday, March 18, 2013 2:44 PM
To:
Homebrew_PCBs@yahoogroups.comSubject: [Homebrew_PCBs] Re: etching the OD of a cylinder to create a
graduated dial
Metal etching is on topic.
What about a stepper motor? 200 steps per revolution. Or if that is not fine
enough, bring that down with toothed belt and pulleys?
Steve Greenfield AE7HD
--- In Homebrew_PCBs@yahoogroups.com, "Rick Sparber" <rgsparber@...> wrote:
>
> This has been a favorite problem of mine for a long time.
>
>
>
> It is standard practice to engrave the outside diameter of a cylinder
> with tick marks and numbers in order to make a graduated dial. I have
> done this by laser printing, mirror image, to clear plastic and then
> bolting it on the OD with the toner on the inside:
>
>
>
> http://rick.sparber.org/Articles/CD/CDM/d.pdf
>
>
>
> It is fairly rugged but not as nice as engraving. I've always thought
> that chemical etching would be idea.
>
>
>
> I'm not interested in super expensive methods or ones requiring more
> than average skill. Sure CNC can do this task, so can a laser cutter.
> Maybe Wal-Mart sells them. No fun there.
>
>
>
> One idea that I just thought of uses a previously engraved dial. I
> would turn a cylinder with the same OD as the dial. Then I would fill
> the grooves in the dial with softened paraffin wax and strike off so
> the rest of the surface is wax free. Then I would chill this dial
> while heating the cylinder to be etched. By rolling them together, I
> hope to transfer the wax from dial to cylinder. If that works, the
> etching process should be easy. I realize this generates raised
> features rather than recesses but that might actually be better. Since
> something like this works for printing, maybe there is reason for hope
here.
>
>
>
> Has anyone tried this? Any warnings or suggestions?
>
>
>
> Thanks,
>
>
>
> Rick
>
>
>
> [Non-text portions of this message have been removed]
>
------------------------------------
Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links