Figure a single laser pass. More than once can mess up the fine lines.
Derek Koonce
DDK Interactive Consulting Services
On 2/28/2013 10:18 AM, MIKE DURKIN wrote:
> do you mean on polyimide kapton copper clad laminate??
>
> you can get it on ebay ...
>
> Actually thats not a bad idea ....
>
> then run through a laser printer a few times ..... then etch ....
>
> Heck ....
>
> Spendy stuff though ..... but then agin .. its cheeaper than 200$ for a 3 board run ...
>
>
> To: Homebrew_PCBs@yahoogroups.com
> From: derek@...
> Date: Thu, 28 Feb 2013 09:56:03 -0800
> Subject: [Homebrew_PCBs] New PCB etching method proposal
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> I just had an idea of a better PCB generation system. It is still in the
>
> works, but may be a great solution.
>
>
>
> There is the photo-resist method that needs darkness.
>
>
>
> There is the Toner Transfer System that I use a lot. But I find that I
>
> am always touching up traces, especially the fine ones.
>
>
>
> One person figured if they can print directly to the PCB using a laser
>
> jet, but the stiff board would not go through the rollers.
>
>
>
> What if I can come up with a flexible material that can be printed to
>
> directly a positive image and then etch? It would be able to go through
>
> laser printers without a problem.
>
>
>
> I am building up some samples to test, but would this list be interested
>
> in such a product?
>
>
>
> Oh, to stiffen up, just add a piece of fiberglass to the back. Which I
>
> can make as well. Would you be interested in this method? How much would
>
> one be willing to pay for the materials for a 2"x2" size of board -
>
> granted a larger one would be possible as well. In fact, using a legal
>
> size copier would allow one to print up a 11" x 17" circuit board.
>
>
>