OK, thanks Baxter.
On Thu, 03 Jan 2013 06:17:53 -0000 "bebx2000" <
bebx2000@...>
writes:
Charlie,
The pinhole tends to become obscure after a few holes, but I just blow
the debris away with a can of air. The real drawback to this setup is
going out of calibration with horizontal movement of the drill head. It's
easy to fix, however; just remove the project box lid, replace the shim
and drill a new hole.
Baxter
--- In Homebrew_PCBs@yahoogroups.com, Missouri Guy wrote:
>
> Neat idea, but I gotta ask...does the light down below collect any
> dust from the drilling or does a vacuum pretty much
> take care of that.
>
> Charlie
>
[Non-text portions of this message have been removed]